Chapter 9. Router9-8 ATLAS 550 User Manual 61200305L1-1AUTHENTICATIONWrite security: 2; Read security: 5Enables the V2 Secret to be advertised when using RIP V2. AUTHENTICA -TION is visible only if RIP V2 is E NABLED (see the previous section, Pro-tocol on page 9-7). When enabled, requires all received RIP V2 packets tobe authenticated against the configured V2 secret. All transmitted RIPV2 packets will include the secret.V2 SECRETWrite security: 2; Read security: 5Defines the secret used to advertise routeswhen using RIP V2. To create the secret,enter the new secret, and press Enter on thekeyboard. Then re-enter the secret and press Enter again to confirm it.V2 SECRET is only visible if AUTHENTICATION is set to ENABLED.P ROXY ARP Write security: 2; Read security: 5Enables or disables proxy ARP on this interface.E THERNET Write security: 2; Read security: 5Provides a way to configure various settings for the Ethernet port. The fol-lowing options are available for review and editing:P ORT NAME Defines the name of the Ethernet port. You can leave this field blank.IP A DDRESS Lists the address assigned to the base Ethernet port. This address is com-posed of four decimal numbers, each in the range of 0 to 255, separated byperiods. This value is set to 0.0.0.0 by default. The IP address is used for theEthernet interface. Obtain the correct IP address from your LAN administra-tor.DEFAULT G ATEWAY Defines or changes the default gateway. Enter the default gateway addressby entering a decimal number into the appropriate field and then pressingEnter to move to the next field. You will need a default gateway if the LANcontains multiple segments. This address is composed of four decimal num-bers, each in the range of 0 to 255, separated by periods. This value is set to0.0.0.0 by default. Contact your LAN administrator for the appropriate ad-dress.This parameter is global throughout the ATLAS 550. Changeshere affect all router interfaces.
