Section 5, User Interface Guide - UIG-540, SCU Utilities61186003L1-1D 5-111PROVISIONING SMART STARTSmart Start is a feature of the MX2820 system that allows a module to be replaced and havethe new module assume the provisioning settings of the old unit.When a new SCU is inserted into the shelf, the SCU will request the provisioning informationfrom the module. This ensures that the SCU has a copy of the latest module provisioninginformation. This information is updated once per minute.The SCU in the MX2820 System has the ability to save its provisioning to modules thatsupport Smart Start. When a module of the same type that was previously in the slot is placedin that slot, The SCU will transmit the provisioning image of the previous module to thereplacement module. Upon validation of the provisioning image, the module writes the provi-sioning to flash and begins running with the new configuration. If the transfer fails or the SCUdoes not have a valid provisioning image, the module operates using the settings saved innon-volatile memory.Provisioning StepsTo enable Smart Start options for the MX2820 SCU, select the option and press E NTER:1. Select S YSTEM C ONTROLLER from the MX2820 Main Menu.2. Select P ROVISIONING from the System Controller menu.3. Select S MART START from the Provisioning menu.Figure 5-80 provides an illustration of the Smart Start screen.Figure 5-80. Smart Start Provisioning Screen4. Select D ISABLE or E NABLE from the Provisioning Screen and press E NTER.5. Return to the MX2820 Main Menu by pressing E SC until the screen appears.Shelf: 1 ADTRAN MX2820 System 04/22/04 13:36Unacknowledged Alarms: MAJOR TID: HTVLALEXD16Smart Start1 - Smart Start : DISABLE2 - Copy Module Provisioning3 - Back-up SCU Provisioning to Linecards4 - Back-up Linecard Provisioning to SCUSelection : '?' - System Help Screen
