MX2820 System Manual7-52 61186003L1-1DFigure 7-8. TFTP Update Screen7. Make sure the Firmware TFTP server IP address is set. Consult the network administratorfor this information.8. Input the Remote Filename where the firmware image is located. This can include a pathand filename to the code image file.9. Select I NITIATE TRANSFER.The upload routine begins and provides a status as follows:a. Downloading the Imageb. Erase the Flashc. Reprogramming the FlashWhen the status indicates “Complete”, the firmware is successfully upgraded.10. Press E SC to return to the Module Download Screen.11. Reset the module.The SCU requires resetting before the new code revision takes effect.a. From the MX2820 Main Menu screen, select S YSTEM CONTROLLER and press E NTER.b. From the System Controller menu, select P ROVISIONING and press E NTER.c. From the Provisioning menu, select R EBOOT SCU and press E NTER.d. Input a Y to confirm the reboot, and press E NTER.The active MUX must be manually reset following download of new software to thatmodule. Select Card Reset from the MUX Provisioning menu. (The standby MUX, ifequipped, will perform a reset automatically.Shelf: 1 ADTRAN MX2820 System 05/18/04 15:55Unacknowledged Alarms: MAJOR MINOR TID: HTVLALEXD16TFTP Update1- TFTP Server : 10.200.2.2232- Remote Filename : downloads/scu/b01.bin3- Initiate TransferSelection : '?' - System Help Screen
