Section 5, User Interface Guide - UIG-540, SCU Utilities61186003L1-1D 5-115Figure 5-83 provides an illustration of the Copy Module Provisioning screen with source andcandidate identified.Figure 5-83. Copy Module Provisioning, Confirmation4. Input a Y, and press E NTER to copy from the Source to the Candidate, or input an N, andpress E NTER to cancel the copy.5. If Y is selected to continue, the provisioning data is copied and the Candidate identifierchanges to Complete.6. If N is selected, then a blank Copy Module Provisioning screen will display again asking forsource selection.BACK-UP LINECARD PROVISIONINGThe B ACK - UP SCU P ROVISIONING TO L INECARDS and B ACK - UP L INECARD PROVISIONING TO SCU options in theSmart Start menu are in place to expedite the Smart Start process. The module provisioningand SCU provisioning are transferred only once per minute. If a module is removed prior tothat one minute save, the Smart Start provisioning image will not match the latest configu-ration.When the task is complete, return to the desired screen by pressing E SC until that screenappears.Shelf: 1 ADTRAN MX2820 System 04/22/04 14:30Unacknowledged Alarms: TID: HTVLALEXD16Copy Module Provisioning1 A - MX2820 M13.. [Source] B - ............ [None]2 A - MX2820 M13.. [Candidate] B - ............ [None]3 A - ............ [None] B - ............ [None]4 A - MX2820 STS1. [None] B - ............ [None]5 A - ............ [None] B - ............ [None]6 A - ............ [None] B - ............ [None]7 A - ............ [None] B - ............ [None]Copy Source: MX2820 M13 in slot 1A to Destination: MX2820 M13 in slot 2A.Execute (Y/N = Yes/No):
