Section 7, User Interface Guide - DLP-700, Code Upgrade Using TFTP61186003L1-1D 7-55NOTETo select all of a particular module type, after entering the slot/position of the first, press A (all) then press E NTER.Modules selected for upgrade will be highlighted in reverse video.12. Press U then E NTER to initiate the transfer of the code image to each of the selectedmodules. The screen will indicate the percentage transferred, followed by a verifying step,and finally a writing step. When complete, the screen will indicate Done.13. Reset the module, if necessary.Many modules will automatically restart their code without taking down the datainterface. In this case, the module display will disappear momentarily and then restore,indicating the new code revision.In other cases, the Done indication will remain and a reset of the module is necessaryfrom that modules Provisioning menu to initialize the new code.FOLLOW-UP PROCEDURESOnce this procedure is complete, return to the procedure which called out this DLP andcontinue with the tasks indicated.
