AEG BES351010M User Manual

Also see for BEB351010B: User manual

• Ensure that the appliance is switched off beforereplacing the lamp to avoid the possibility of electricshock.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metalscrapers to clean the glass door since they can scratchthe surface, which may result in shattering of the glass.• If the mains power supply cable is damaged, it mustbe replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoidan electrical hazard.• To remove the shelf supports first pull the front of theshelf support and then the rear end away from theside walls. Install the shelf supports in the oppositesequence.• The means for disconnection must be incorporated inthe fixed wiring in accordance with the wiring rules.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damagedappliance.• Follow the installation instructionsupplied with the appliance.• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Do not pull the appliance by thehandle.• Keep the minimum distance from theother appliances and units.• Make sure that the appliance isinstalled below and adjacent safestructures.• The sides of the appliance must stayadjacent to appliances or to units withthe same height.• The appliance is equipped with anelectric cooling system. It must beoperated with the electric powersupply.2.2 Electrical connectionWARNING!Risk of fire and electricalshock.• All electrical connections should bemade by a qualified electrician.• The appliance must be earthed.• Make sure that the parameters on therating plate are compatible with theelectrical ratings of the mains powersupply.• Always use a correctly installedshockproof socket.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage tothe mains plug and to the mainscable. Should the mains cable needto be replaced, this must be carriedout by our Authorised Service Centre.• Do not let mains cables touch orcome near the appliance door,especially when the door is hot.• The shock protection of live andinsulated parts must be fastened inwww.aeg.com4