Identification elements107System functions and features as of R3.0syd-0367/1.3 – R3.0 – 03.20134. 7. 4 CLIP format for transit connections in networksDifferent CLIP formats are sometimes used in a PISN with PINX in different coun-tries, with QSIG connection of third-party systems or applications, and with con-nections via an SIP network.The CLIP format and an exchange access prefix can be configured to ensure thatthe correct CLIP is displayed in networks whenever possible, even with interna-tional transit connections.Value range for the parameter Transit CLIP format in the trunk group settings(CM_3.1.5):• National:– The CLIP for transit connections with incoming national calls is formed in ac-cordance with E.164/national.– The CLIP for transit connections with incoming international calls is formed inaccordance with E.164/international.• International:The CLIP for transit connections is formed in general in accordance with E.164/international.• Unknown with national prefix:– The CLIP for transit connections with incoming national calls is formed in ac-cordance with E.164/unknown + National prefix + Transit exchange access pre-fix.– The CLIP for transit connections with incoming international calls is formed inaccordance with E.164/unknown + International prefix + Transit exchange ac-cess prefix.• Unknown with international prefix:The CLIP for transit connections is formed in general in accordance with E.164/unknown + International prefix + Transit exchange access prefix.The parameter Transit exchange access prefix is also located in the trunk group set-tings and is configurable only if Transit CLIP format" is set on Unknown with nationalprefix or Unknown with international prefix.The parameters National prefix and International prefix are to be found under Ownlocal prefixes in the location-related settings under CM_2.5.1.1._Regions.