Identification elements84 System functions and features as of R3.0syd-0367/1.3 – R3.0 – 03.20134. 4 CLIP with Outgoing CallsWith an outgoing call the CLIP number is transmitted along with the NPI and TONinformation. In principle there are two possible variants for creating a CLIP number:• The communication server creates the CLIP number automatically, based on theorigin and routing of the call.• A number is entered permanently as the CLIP number in the user configuration.4. 4. 1 Creating the CLIP in the communication serverWith the Automatic CLIP = Yes setting in the user configuration, the communicationserver generates a CLIP number. If there is a suitable DDI number for the callinguser, that number will be used.A suitable DDI number is a number in a direct dialling plan which• is linked directly or through a user group to the calling user via a call distributionelement, and• is linked with the same trunk group via which the outgoing call is routed.If there is more than one suitable DDI number, the lowest one is used.The trunk group settings are used as the numbering plan identifier and type ofnumber.If there is no suitable DDI number, the trunk group settings are used for calls intothe public network (Fig. 30 ), for calls into the private leased-line network it also de-pends how the automatic CLIP is set in the trunk group configuration (Fig. 32).
