Chapter 2: Installing Adaptec Storage Manager ● 21Installing on UnixWare or OpenServerNote: If a previous version of Adaptec Storage Manager is installed on your system, you mustremove it before beginning this installation. Any customization files you created with the previousversion are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrmRaidMan command.To install Adaptec Storage Manager:1 Insert the Adaptec Storage Manager Installation CD.2 Mount the Adaptec Storage Manager Installation CD:mount -r -F cdfs /dev/cdrom/cdromdevicefile /mntwhere cdromdevicefile is the device file name (for example, c0b0t010 for a CD-ROMblock device). To find the device file name, look in the /dev/cdrom directory.3 Install Adaptec Storage Manager:For UnixWare pkgadd -d /mnt/unixware/manager/RaidMan.dsFor OpenServer pkgadd -d /mnt/openserv6/manager/RaidMan.ds4 Follow the on-screen instructions to complete the installation.5 Unmount the Adaptec Storage Manager Installation CD:umount /mntInstalling on SolarisNote: If a previous version of Adaptec Storage Manager is installed on your system, you mustremove it before beginning this installation. Any customization files you created with the previousversion are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrmRaidMan command.To install Adaptec Storage Manager:1 Insert the Adaptec Storage Manager Installation CD.The CD mounts automatically. (If it doesn’t, manually mount the CD using a commandsimilar to the one shown below. Refer to your operating system documentation fordetailed instructions.)mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt2 Install Adaptec Storage Manager:pkgadd -d/ /solaris_x86/manager/StorMan.pkg3 Follow the on-screen instructions to complete the installation.4 Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operatingsystem documentation for detailed instructions.