Chapter 6: Modifying Your Direct Attached Storage ● 738 Click Apply, then click Yes.Adaptec Storage Manager builds the RAID Volume. The configuration is saved on theAdaptec controller and on the physical drives. Adaptec Storage Manager replaces theindividual logical drives with a single RAID Volume in the Logical Devices View.9 Partition and format your RAID Volume. See page 36 for more information.Creating a JBOD DiskYou can create a JBOD disk from any Ready disk drive. A JBOD disk:● Appears as a physical disk drive to the operating system.● Is not redundant.● Comprises all available disk space.● Is not bootable (that is, you cannot boot the operating system from a JBOD).To create a JBOD disk:1 In the Physical Devices View, click a Ready disk drive.2 In the menu bar, select Actions, then click Create JBOD disk.Adaptec Storage Manager creates the JBOD disk.Creating multiple JBOD Disks in the WizardTo make it easier to create multiple JBODs, you can use the wizard.To create multiple JBODs in the wizard:1 On the toolbar, click Create.2 When the configuration wizard opens, select Custom configuration..., then click Next.3 Click Advanced settings, select JBOD disk, then click Next.RAID Volume replaces the two RAID5 logical drives shown in Step 1
