Chapter 3: Building Your Storage Space ● 333 Enter the host name or TCP/IP address of the remote system. Or select a system from thedrop-down list.4 Enter the startup port number of the remote system. The default port number is 34571.5 Click Connect.Adaptec Storage Manager connects to the remote system and adds it to the list of managedsystems in the Enterprise View.Note: You must log in to a remote system with the proper permission level to complete thetasks you wish to perform. See Understanding Permission Levels on page 27 for moreinformation.6 If Adaptec Storage Manager detects a new controller on the local system, the NewHardware Detected window opens. Click Register Now, then follow the on-screeninstructions to complete the registration.7 Continue with Creating Logical Drives on page 34.Removing a Remote SystemIf you no longer want to monitor a remote system, you can remove it from the Enterprise Viewof Adaptec Storage Manager.Removing a remote system does not take it off-line.Note: Adaptec Storage Manager has a wizard to help you manage the remote systems in yourstorage space. The wizard simplifies the process of a removing remote systems from the EnterpriseView. For more information, see Managing Remote Systems on page 127.To remove a remote system:1 In the menu bar of the main window, select Remote, select Remove managed system, thenclick the system you want to remove.The Remove Managed System window opens.2 If you want to continue receiving events from the remote system after it’s been removedfrom the local system, select Continue to receive events from the remote system from thedrop-down menu.3 Click OK.The remote system is removed from the Enterprise View of Adaptec Storage Manager.
