4-10Ultra160 Family Manager Set User’s Guidelun_enable=1 0-FF 01 A bit mask to enablescanning for specificLUNs on all targets. Thedefault value of 01 causesthe driver to scan LUN 0only. This enable bit maskis entered in hex (see BitMask Options onpage 4-11.)max_tags= 1-128 16 Specifies maximumnumber of taggedcommands per device.multlun_targets= 0-FFFF FFFF A bit mask to enableLUNs on selected targets.By default, LUNs on alltargets are enabled. Thisbit mask is entered in hex(see Bit Mask Options onpage 4-11).slot= 0-xxxx2 0 Defines a physical slotnumber for the hostadapter. If 0 is specified, orif this option is notspecified, then the driverloads for all Ultra160Family host adapters.verbose= yes, no no Displays host adapterconfiguration informationat load time.1 Many multiple-LUN and removable-media devices are changers or magazines.Some of these are only supported by the driver through an ASPI driver provided bythe hardware vendor.2 The values can vary and are dependent on the system configuration.Option Values Default Description
