4-11Novell NetWare InstallationBit Mask OptionsUse the example below as an aid for calculating Bit Mask option hexvalues. Each SCSI device is enabled by a 1 in its corresponding bitposition. The table that follows the figure, lists the binary-to-hexconversions. Using this example, if you want to enable scanning forLUNs 0, 2, and 6 on all targets, then use the command line option oflun_enable=0045.Sample Load CommandsHere is a simple load command with no option switches (if loadedfrom drive A):load a:\netware\adpt160m.hamIf an error message appears when attempting to load the driver,refer to Troubleshooting on page 4-16.Here is an example of theadpt160m.ham driver being loaded withcommand line options (if loaded from drive A):load a:\netware\adpt160m.ham verbose=y slot=2Binary Hex Binary Hex0000 0 1000 80001 1 1001 90010 2 1010 A0011 3 1011 B0100 4 1100 C0101 5 1101 D0110 6 1110 E0111 7 1111 F1500=0045SCSI ID0, 2, 6Bit PositionBinaryHexConvertedbinary-to-hex40 514013012011010090807030612150104001
