4-14Ultra160 Family Manager Set User’s Guide2 Whensbackup is loaded, it asks for a login name. Enter theappropriate name.3 Ifsbackup asks you to select the device driver, select the HPDIBI-2 Tape Driver, regardless of the type of SCSI tape drivebeing attached (e.g., even if the tape drive is manufactured byWangtek, do not select the Wangtek driver).Note: Novell also includes a driver calledadaptec.nlm.This driver is not needed and should not be loaded.Adaptec’s driver module takes advantage of ASPIinterface features bypassed byadaptec.nlm.Novell publishes a list of SCSI tape drives supported bysbackup.nlm.Using a CD-ROM with NetWareTo use a CD-ROM with NetWare, follow these instructions:1 Loadadpt160m.ham by entering the following line::load [pathname]adpt160m2 Thescsicd.cdm driver will auto-load if the device(s) aredetected.Note: For multiple LUN CDs, enable multiple LUNscanning with the lun_enable switch (e.g., loadadpt160m lun_enable=FF). The lun_enable switch isneeded foradpt160m.ham.Enter the following line at the prompt:scan all luns
