Adaptec P2280A Manual

Also see for 39160: Installation guide Manual

Contents

4-18Ultra160 Family Manager Set User’s Guide[xxxxx0a4] SCSI bus reset by third party hardwareHardware such as an array enclosure may have reset the SCSI bus.This is a normal condition unless you receive additional errors.[xxxxx0a7] Unable to allocate memory[xxxxx0a8] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.[xxxxx0a9] Possible interrupt conflictThis indicates that the adapter IRQ conflicts with the IRQ of anotherboard installed in your system. Check your hardwaredocumentation for instructions on setting and changing IRQs.[xxxxx0c9] Invalid command line parameterA command line option for the driver is invalid. See Using the LoadCommand Line Options on page 4-9 for valid command line options.[xxxxx0ca] Invalid command line syntax[xxxxx0cb] Invalid command line syntax[xxxxx0cc] Invalid command line syntaxThe command line syntax for the driver is incorrect. See Using theLoad Command Line Options on page 4-9 for entering the correctsyntax.[xxxxx07c] Unable to allocate memory[xxxxx07d] Unable to allocate memory[xxxxx07e] Unable to allocate memory[xxxxx07f] Unable to allocate memoryThis indicates that there may be a problem with the amount ofmemory installed in your system. Verify that your system has atleast the minimum amount of memory required by your operatingsystem.r