5-5UnixWare Installation5 Type pkginfo -l adstxx and press Enter.6 Verify that theadst21 oradst70 driver is now listed.If theadst21 oradst70 driver does not appear in the pkginfolisting, turn to Troubleshooting on page 5-9.The listing should be similar toPKGINST: adst21NAME: Ultra160 Driver for UnixWare 2.1xorPKGINST: adst70NAME: Ultra160 Driver for UnixWare 7.1Modify the New System File1 Display the contents of theadst21 file by typing the followingand pressing Enter:For UnixWare 2.1x:cat /etc/conf/sdevice.d/adst21For UnixWare 7.1:cat /etc/conf/sdevice.d/adst702 If your computer is to boot from a device connected to aUltra160 Family host adapter, verify that the line $static ispresent immediately below the line $version 2.3 If your computer is not to boot from the host adapter SCSI bus,and you wish to leave the driver as a loadable module, editand verify that the line $static is not present directly below theline $version 2.
