Configuration Possibilities108 AXIS 5400+ / AXIS 5600+ Userís Manual8. The new printer is added to your Select PrinterSelect PrinterSelect PrinterSelect Printer window:9. You are now ready to print using IPP: specify your new destination printerfrom the printer list and click PrintPrintPrintPrint.Network SpeedWith the Network Speed parameter you can manually specify the speed atwhich you will send and receive network packages. You can change theNetwork Speed setting to correspond to the type of network you are using(10 or 100 Mbit).To change the Network Speed in an Ethernet network, log in to the printserverís internal Web pages and click Admin | General Settings =>Change.You have the options listed here:The default Network Speed value is AUTO_SENSE, which is the correctoption for the majority of users.If you choose a faulty Network Speed option for your network, you mayloose contact with the print server.To reset the Network Speed parameter to AUTO_SENSE, you will have toreboot the print server (disconnect and then re-connect the externalpower supply).Network Speed CommentAUTO_SENSEThis is the default value where the print server detectswhich speed is optimal for each network package youtransfer.10_HALF__DX 10 Half Duplex10_FULL_DX 10 Full Duplex100_HALF_DX 100 Half Duplex100_FULL_DX 100 Full Duplex
