Axis 5400+ User Manual
Also see for 5400+: SpecificationUser guideInstallation guideUser guideUser manual
                                                                                                                                                                    | |
Contents
| 
Management and Configuration90 AXIS 5400+ / AXIS 5600+ Userís Manual4. Click OKOKOKOK to create the network group.You can edit the properties of each network group from the NetworkGroups page. Simply select the network group from the list and use one ofthe Edit, Copy or Remove commands.ManagingPrint ServersFollow the instructions below to access the print server using AXISThinWizard:1. Click Manage NetworkManage NetworkManage NetworkManage Network in the main menu.2. Select the network group, including the, from the drop-down list. All AXISservers included in the network group appear in the window.3. Click the link of the AXIS 5400+/AXIS 5600+ to access its internal Web page.4. The ëSrví and ëDeví columns show the status of your print servers and printers.Changing the IPSettingsUsing AXIS ThinWizard you can also set or change each print serverís IPparameters.1. Click IP SettingsIP SettingsIP SettingsIP Settings in the main menu.2. Select print server in the list.3. Enter your data: IP address, Subnet mask, Default gateway and the printserverís password (default password is passpasspasspass).4. Click SetSetSetSet to save your settings.5. Click RescanRescanRescanRescan to update AXIS ThinWizard and see the changes.If Your Print Server isnot Shown in the ListIf your print server is not shown in the list, click ìClick here...î. Byentering the serial number of the print server (found on the undersidelabel) you will be able to set the print serverís IP parameters.Example: 00408c181cf0UpgradingAxis ServersRefer to ìUpgrading using AXIS ThinWizardî on page 80 for moreinformation about upgrading Axis servers using AXIS ThinWizard.MultipleConfiguration andInstallationUsing AXIS ThinWizard it possible to change the settings of several Axisservers simultaneously. It is also possible to copy the configuration fromone server to another. This is a convenient way to install a new server,based on the settings of an already existing server.For additional information, please refer to the AXIS ThinWizard onlinehelp.Using FTP for Print Server ManagementHaving assigned an IP address to your Axis Network Print Server, asdescribed in ìAssign an IP Address to the Print Serverî on page 14, you |
Related manuals for Axis 5400+
manualsdatabase
Your AI-powered manual search engine