Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 32 page image

Adding Printers in Windows32 AXIS 5400+ / AXIS 5600+ Userís ManualAdding Printers in Windows 98 and Me over TCP/IP using AXIS Print Monitor1. Install AXIS Print Monitor on all workstations that will print via the Axisprint server.2. Next, start the Windows Add Printer Wizard: select Settings | PrintersSettings | PrintersSettings | PrintersSettings | Printers fromthe StartStartStartStart menu and double-click the Add PrinterAdd PrinterAdd PrinterAdd Printer icon.3. After clicking NextNextNextNext in the first dialog, the Wizard asks you to select betweenLocal PrinterLocal PrinterLocal PrinterLocal Printer and Network PrinterNetwork PrinterNetwork PrinterNetwork Printer. You must select Local PrinterLocal PrinterLocal PrinterLocal Printer as the printserver emulates a local printer port. Click NextNextNextNext.4. Choose the appropriate print driver for your printer. If the desired printdriver already appears within the displayed Manufacturers and printersManufacturers and printersManufacturers and printersManufacturers and printerslists, highlight your selection, click NextNextNextNext and proceed directly to step 7. Itis only necessary to perform steps 5- 6 if your printer does not feature inthe model list.5. Click the Have Disk...Have Disk...Have Disk...Have Disk... button. Insert the printer driver diskette/CD into theappropriate disk drive of your computer.6. Select the type of printer you want to install from the diskette/CD and clickNextNextNextNext. If you already have the printerís driver installed, you will be askedwhether to keep it or to replace it.7. Select the Printers@TCP/IP Port and click NextNextNextNext.8. Enter an appropriate name for your printer and choose whether you wantit to be the default printer. Click NextNextNextNext.9. In the next window, do not order a Test Page to be written, just click FinishFinishFinishFinish.10. The printer you have defined will now be displayed in the Printers Folder.Right-click the printer object and select PropertiesPropertiesPropertiesProperties.11. Click the DetailsDetailsDetailsDetails tab within the PropertiesPropertiesPropertiesProperties page and then click Add PortAdd PortAdd PortAdd Port todisplay the available monitors.12. Click the radio button ìotherî. Select AXIS PortAXIS PortAXIS PortAXIS Port and then click OKOKOKOK.13. Select LPR (TCP/IP)LPR (TCP/IP)LPR (TCP/IP)LPR (TCP/IP) as your choice of protocol and click OKOKOKOK.14. Enter the IP address or the host name of your print server (Example enteran IP address: 192.168.3.191 or a host name: AXIS181636).In the Logical Printer NameLogical Printer NameLogical Printer NameLogical Printer Name field, enter the port you wish to use; LPT1, LPT2LPT1, LPT2LPT1, LPT2LPT1, LPT2or COM1or COM1or COM1or COM1.15. The TCP/IP port will then be added automatically to the list of available ports.Click ApplyApplyApplyApply and OKOKOKOK.16. You may now configure the port, as described below. The Axis Printer Portis now installed.