Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 31 page image

Adding Printers in WindowsAXIS 5400+ / AXIS 5600+ Userís Manual 31Adding Printers over NetBIOS/NetBEUI in Windows NT using AXIS Print MonitorSee to it that the NetBEUI protocol is installed on your client. Follow theprocedure below to install Axis Printer Ports from a Windows NTworkstation:1. Install AXIS Print Monitor on all workstations that will print via the printserver.2. To start the Add Printer Wizard, select Settings | PrintersSettings | PrintersSettings | PrintersSettings | Printers from the StartStartStartStartmenu and double-click the Add PrinterAdd PrinterAdd PrinterAdd Printer icon.3. The Wizard asks you to select My ComputerMy ComputerMy ComputerMy Computer or Network printer serverNetwork printer serverNetwork printer serverNetwork printer server.Select My ComputerMy ComputerMy ComputerMy Computer. Click NextNextNextNext.4. Click Add Port...Add Port...Add Port...Add Port... In the Available Ports dialog, select AXIS PortAXIS PortAXIS PortAXIS Port and click NewNewNewNewPort..Port..Port..Port...5. Select NetBIOS/NetBEUINetBIOS/NetBEUINetBIOS/NetBEUINetBIOS/NetBEUI as your choice of network protocol and click OKOKOKOK.6. Select the AXIS Port you want to add from the list of available ports. Theport appears as . (Example: AX100086.LP1). The istaken from the table below. Click OKOKOKOK.7. Close the Printer Ports window.8. Click the Configure Port...Configure Port...Configure Port...Configure Port... button. Choose whether error condition pop-upmessages are to be displayed by checking the box in the Configure Axis Portsdialog. Define the frequency at which the error messages should bedisplayed after retry. Click OKOKOKOK. Continue the installation by clicking NextNextNextNext.9. Choose the appropriate printer driver for your printer. Click NextNextNextNext andproceed directly to step 12. It is only necessary to perform steps 10-11 ifyour printer does not appear in the list.Note:10. Click the Have Disk...Have Disk...Have Disk...Have Disk... button. Insert the printer driver diskette/CD that wasprovided with your printer, select the appropriate diskette/CD drive and clickOKOKOKOK.11. Select the printer driver you want to install and click NextNextNextNext.12. Enter an appropriate name for your printer and click NextNextNextNext.13. Choose whether you want to share the printer with other network users andclick NextNextNextNext.14. Choose whether you want to print a test page and then click FinishFinishFinishFinish.Ports available Parallel port1 Parallel port 2 Serial portAXIS 5400+ LP1 ó óAXIS 5600+ LP1 LP2 CM1Even if the desired printer is available in the Manufacturers and Printers lists, you areadvised to use the printer driver provided with the printer. This assures you of the latestdriver software.