Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 61 page image

Adding Printers in NetWareAXIS 5400+ / AXIS 5600+ Userís Manual 61Basic Setup with AXIS NetPilotInstall the AXIS NetPilot software on your computer. AXIS NetPilot runson Windows 98 and Windows NT.Starting theInstallationFollow the instructions below to install the AXIS 5400+/AXIS 5600+ withAXIS NetPilot:1. Start AXIS NetPilot by double-clicking the NetPilot icon, which is locatedin the folder where you installed AXIS NetPilot.2. Locate the Axis Network Print Server in the ëNew Axis Unitsí folder. Selectit and click the InstallInstallInstallInstall button on the AXIS NetPilot toolbar. If your networkis large, it could take a few seconds before the print server appears in thefolder.3. Choose the with Installation Wizardwith Installation Wizardwith Installation Wizardwith Installation Wizard option.The AXIS NetPilot Installation Wizard guides you through the installationprocess. The following options are available:Note:Print Server Name The default print server name consists of the characters ëAXISí followedby the last six digits of the serial number. If you want to change the printserver name, just type the new name in the available text field.Environments Choose which networking environments you want to configure the AxisNetwork Print Server for, e.g. NetWare, TCP/IP, Windows & OS/2 orMacintosh. If your network comprises various different platforms, youcan enable any combination of environments.NetWare NDS Place NetWare Print Queues on a specific bindery server, or alternativelyinto an NDS Tree.The IP address Choose the method the Axis Network Print Server should employ forobtaining an IP address. DHCP, ARP, RARP, BOOTP and Auto-IP aresupported. You can also select to set the IP address manually. Refer toìAssign an IP Address to the Print Serverî on page 14 for furtherinformation about setting the IP address.Print Queues The Axis Network Print Server uses the print server name followed by theprinter port as the default Print Queue names and print server port names.If you want to change the default printer queue names, just type the newnames in the available text fields.The number of options varies according to the number of environments you enable.