Adding Printers in NetWareAXIS 5400+ / AXIS 5600+ Userís Manual 43Setup using NDPSThe AXIS 5400+/AXIS 5600+ supports Novell Distributed Print Services(NDPS). You can run NDPS over Pure IP (TCP/IP) or IPX/SPX.Before the AXIS 5400+/AXIS 5600+ can be installed, make sure thatNDPS is installed and a Broker is loaded on your NetWare file server.Axis Network Print Server uses the AXIS NDPS Gateway for printing innetworks using either IP or IPX as transport protocols. The printergateways are included with the NDPS software (from version 5.1 and up)and are automatically installed together with NDPS.Installing the AxisNetwork Print Serverin the NDPSenvironmentsHaving assigned an IP address to the AXIS 5400+/AXIS 5600+ asdescribed in Assign an IP Address to the Print Server, on page 14, you arenow ready to install the Axis Network Print Server for NDPS printing.You can select to install the connected printers as public or controlledaccess printers. Follow the instructions below to install the Axis NetworkPrint Server using NDPS:Important:ï The NDPS Enabled parameter of the Axis Network Print Server is by default enabled. It mustbe set to Yes in order for the communication between the print server and the NDPS gatewayto be enabled. To change this parameter, log in to the print serverís Web pages and choose:Admin | Network Settings | Detailed View | NetWare => NDPS Enabled => Yes.ï If you do not have an NDPS Manager object available, start out with creating one in the Net-Ware Administrator.
