OTHER BASIC PROCEDURES1133Checking if thread spool changesare necessaryWhen selecting a pattern, the number of threadchanges can be viewed, however, which threadcolors are used in the pattern cannot be checkedon this screen. Whether or not and when threadspools will need to be changed can be checkedwith the following indicators.■ Time until the machine stopsembroideringThis indicator shows the amount of time until themachine stops embroidering. The machine stopswhen a spool change is required, or when themachine is set to be stopped by other settings.If the spool change indicator is appears, themachine will require a spool change. When the timeis indicated in red, it is the last color embroideringbefore the machine stops.1 Time until the machine stops■ Spool change indicator ( )The spool change indicator in the stitch navigatingscreen indicates the number of times that the threadspools will need to be changed and the amount oftime between changes.a Use the scroll bar on the right side of thethread color sequence display in theembroidering screen.→ Each time is touched, the thread color sequencedisplay scrolls down to the next color. Afterreaching the last color in the thread color sequencedisplay, the first color is selected.• The display can also be scrolled by using the scrollbar.bCheck the position of .1 indicates when the thread spools willneed to be changed. The thread spools will needto be changed the number of times that thisindicator is displayed and between the two threadcolors at the point where it is displayed.2 Touch to scroll up through the thread colorsequence display. Each time this key is touched,the previous color in the thread color sequencedisplay is selected. After reaching the first color inthe thread color sequence display, the last color isselected.c After checking the desired information,touch or the top of the scroll bar toreturn to the first color.112
