220Touch (settings key) to change many of the basic embroidery machine settings.Understanding the settings screenThere are seven pages in the settings screen. Touch and in the lower-center of the screen until thedesired page is displayed. The key appears on all pages.■ Page 11 An image of the current settings screen can besaved on USB media.2 The settings on the page containing this key willbe reverted to their defaults.3 The guides (centerpoint marker and grid) for thepattern display area can be specified. (Refer topage 223.)4 Changing the thread color displayThe color information in the thread color sequencedisplay and the needle bar thread information canbe switched to the color name, the thread brandand color number or the sewing time. (Refer topage 225.)5 PES Thread CodeYou can display the thread color for “PES” formatdata according to the machine setting, or settingfrom the embroidery editing software. (Refer topage 226.)6 Embroidery Background Color/ThumbnailBackground ColorDepending on the color of the embroidery,changing the background color of the patterndisplay area and thumbnails may make them morevisible and easier to select. (Refer to page 227.)■ Page 27 “DST” SettingSpecifies whether or not jumpstitches are cut. Inaddition, when using Tajima embroidery data(.dst), you can specify whether or not the thread iscut according to the specified number of jumpcodes. (Refer to page 227.)8 Short Stitch DeleteSpecifies the length of short stitches that are to bedeleted. (Refer to page 228.)9 Thread TailSpecifies the length of upper thread that remainsthreaded through the needle after the thread istrimmed (length of thread passed through the eyeof the needle). (Refer to page 228.)0 Basting DistanceSpecify the distance between the pattern and thebasting stitching. (Refer to page 128.)Using the Settings Key164352Note• If the settings for ““DST” Setting” 7 or“Short Stitch Delete” 8 are changed fromthe previous setting, the new settings areonly applied to the next embroidery.7098
