160■ If the memory is fullIf the screen below displays, either the maximumnumber of patterns have been saved or the patternyou want to save takes a lot of memory, and themachine cannot save it. Press and delete apreviously saved pattern, then you can save thecurrent pattern. Refer to “Retrieving patterns fromthe machine’s memory” on page 164.Saving embroidery patterns toUSB media/SD cardWhen sending embroidery patterns from themachine to USB media/SD card, plug the USBmedia/SD card into the machine’s USB port/SDcard slot.a Touch when the pattern you want tosave is displayed in the embroidery settingsscreen.b Insert the USB media/SD card into the USBport/SD card slot on the machine.1 SD card slot2 USB portcTouch , or .* Touch to return to the original screen withoutsaving.→ The “Saving…” screen is displayed. When thepattern is saved, the display returns to the originalscreen automatically.Memo• USB media is commercially available, butsome USB media may not be usable withthis machine. Please visit our website( www.babylock.com ) for more details.• Depending on the type of USB media beingused, either directly plug the USB deviceinto the machine’s USB port or plug theUSB media Reader/Writer into themachine’s USB port.• The USB media/SD card can be inserted orremoved at any time.Note• Do not insert anything other than USBmedia into the USB media port. Otherwise,the USB media drive may be damaged.• Do not insert anything other than SD cardinto the SD card slot. Otherwise, the SDcard slot may be damaged.Note• Do not insert or remove USB media/SDcard while “Saving…” screen is displayed.You will lose some or all of the pattern youare saving.
