SELECTING/EDITING/SAVING PATTERNS1675■ If the desired pattern cannot berecalledWhen recalling pattern data from the computer, thedata is not taken directly from the computer.Instead, the pattern data is temporarily written to themachine, and that written pattern data is recalled. Atotal of about 10 MB of embroidery patterns can besaved in the “Removable Disk”. Pattern data cannotbe recalled if that data amount is exceeded.1 Shows the amount of free space in the USB areaof the machine. If pattern data with this size isadded, it can be recalled (temporarily written).To recall a pattern larger than the amount of spaceavailable, delete any currently written patterns, andthen place the pattern that you wish to recall intothe folder.a Remove all unnecessary patterns from the“Removable Disk” folder on the computer.Select the pattern data, and then move it to a differentfolder, the Recycle Bin, or right-click it and click“Delete”.bPlace the pattern that you wish to recallinto the “Removable Disk” folder.→ After writing the data to the embroidery machine,the key for that pattern appears in the screen.c If the desired pattern can still not bewritten, repeat steps a and b.Saving embroidery patterns fromany memory source to anothermemoryEmbroidery patterns saved in the machine’smemory, USB memory, SD card, or PC can betransferred to each other.aOn the home screen, press the key youwant to retrieve/recall from.b Touch the key of the pattern you want tosave.c Touch .1Note• Design will be displayed on screen.
