212s Touch the position for the third pattern willbe connected on the screen, and then touch. In this example, touch the upperright side of the second pattern.• Pattern rotates automatically when corner position isselected.1 Touch the connecting area2 Third pattern C3 Second pattern B4 Touch to move the third pattern.tFollow the on-screen instruction to performsteps j to n.uPress , then touch and thenpress the start/stop button to embroider thethird pattern.→ After embroidering of the third pattern is finished,the following message appears. When finishedconnecting patterns, touch .→ After embroidering is finished, at the top leftside of the screen disappears.The three patterns have been connected.Touch to clear the pattern.Changing the position of a stickerIf the selected pattern or positioning stickers forconnecting the next pattern do not easily fit in theembroidering area, follow the on-screeninstructions that appear after step l on page 209in order to move the positioning stickers.For an example, the on-screen instruction appearswhen you use the embroidery frame with a size of10 cm × 10 cm (4 inches × 4 inches) to connectpatterns as shown below.1 Pattern A2 Pattern Ba Refer to steps a through l of Connectingthree patterns using the embroidery framewith a size of 10 cm × 10 cm (4 inches × 4inches) to embroider the first pattern and toconnect the second pattern.2134
