BASIC SETTINGS AND HELP FEATURE2276Changing the background colorsof the embroidery patterns orthumbnailsThe background colors of the pattern display areaand pattern thumbnails. Depending on the patterncolor, select the desired background color fromthe 66 settings available. Different backgroundcolors can be selected for the pattern display areaand pattern thumbnails.When the embroidery machine is purchased,white color is selected.The background color settings can be specifiedfrom page 1 of the settings screen.aTouch .bSelect the background color from the 66settings available.1 Selected color2 Touch to return to the settings screen.Specifying jumpstitch trimming /“DST” jump codes for trimmingYou can specify whether or not jumpstitches arecut. In addition, when using Tajima embroiderydata (.dst), you can specify whether or not thethread is cut according to the specified number ofjump codes.ON: The machine cuts the upper and bobbinthread before the jumpstitch. When Tajimaembroidery data (.dst) is used, the machineconverts the “jump” code to a trim code, based onthe number specified on the next line.OFF: The machine does not cut either a jumpstitchor the “jump” code in Tajima embroidery data(.dst).When the machine is purchased, “ON” is selectedand the number of jumps is set to “3”.The “DST” thread trim settings can be specifiedfrom page 2 of the settings screen.a Touch or to select the desiredsetting.Memo• The setting remains selected even if themachine is turned off.12Note• If the setting is changed from the previoussetting, the new setting is only applied tothe next embroidery.Note• This setting is not applied to the trimming ofthreads between characters in alphabetpatterns. (Refer to “Trimming the threadsbetween characters” on page 183.)Memo• The number of jump codes cannot bespecified for data other than Tajimaembroidery data (.dst).
