5 Getting StartedPower up the sensor, and verify that the power LED is on blue. Ethernet models only: verify that the Ethernet indicator is onamber to verify the Ethernet connection.5.1 Install Barcode ManagerAdministrative rights are required to install the Barcode Manager software.Important: Install Barcode Manager on a Windows® XP, 7, 8, or 1014 computer. Barcode Manager doesnot currently support Windows Embedded (often used in industrial PCs and/or PLCs).1. Download the latest version of Barcode Manager fromwww.bannerengineering.com.2. Navigate to and open the downloaded file.3. Run Barcode Manager_Setup.exe to access the installation screen.4. Follow the onscreen installation procedure.After the installation is complete, the Barcode Manager entry is created under Start > Programs > BannerEngineering. A desktop icon is also created.5.2 Ethernet Device DiscoveryThe following configuration procedure assumes that a laptop computer running Barcode Manager is connected to a factorydefault reader through the Ethernet port.The Barcode Manager user interface opens and displays a list of all the devices belonging to the Local Area Network (LAN).Figure 48. Device DiscoveryThe Barcode Manager discovery feature also shows devices not belonging to the LAN and displays them in light gray (seeFigure 48 on page 39).The following is an example configuration for Windows® operating system version 7, 8, or 10.14 Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.ABR 7000 Series Barcode Readerwww.bannerengineering.com - Tel: + 1 888 373 6767 39
