Banner SC26-2 Instruction Manual

Also see for SC26-2 Series: Instruction manual Quick start guide Manual

Contents

Banner SC26-2 Instruction Manual Manual pdf 21 page image

Advanced settings (where applicable):Figure 11. Advanced Safety Input Settings• Simultaneity (where applicable)—Simultaneous or Concurrent (see Glossary on page 115 for definitions)• Debounce Times—the signal state transition time• Monitored/Non-Monitored (where applicable)4.7.2 Adding Status Outputs1. On the Equipment view, click below the module which will have the status monitoring.2. Click Status Outputs to add status monitoring2.Figure 12. Status Outputs3. Select appropriate Status Output settings:2 Status outputs can be configured when the state of an input device or an output needs to be communicated. The IOx terminals areused for these status signals.XS/SC26-2 Safety Controller21