4.10 Industrial EthernetFigure 40. Industrial Ethernet viewThe Industrial Ethernet view of the PC Interface allows configuration of the Virtual Status Outputs, which offer the samefunctionality as Status Outputs (added on the Equipment view) over the network (see Status Output Signal Conventionson page 95 and Status Output Functionality on page 95 for detailed information). Up to 64 Virtual Status Outputs canbe added for any configuration using Modbus/TCP, Ethernet/IP Input Assemblies, Ethernet/IP Explicit Messages, and PCCCprotocols.To access the Industrial Ethernet view:1. Click Network Settings.2. Select Enable Network Interface.3. Adjust any settings, if necessary (see Network Settings on page 46).4. Click OK.Use the Auto Configure function, located on the Industrial Ethernet view of the PC Interface, to automatically configurethe Virtual Status Outputs to a set of commonly used functions, based on the current configuration. Click in theFunction column next to any of the VOx cells to add a Virtual Status Output manually. Functions of all Virtual StatusOutputs can be modified by clicking on the button that contains the name of the function of the Virtual Status Output or byclicking Edit under the Properties table when VOx is selected.XS/SC26-2 Safety Controller45
