Operand BChoose the second variable from the vision tools in the inspection, or select a user-defined constant value.Figure 254. Operand BInspection Pass/FailSelect the Contribute to Inspection Pass/Fail check box (default) if the tool will influence the Pass/Fail status of the inspection.Figure 255. Inspection Pass/FailThe Pass/Fail contribution influences the following:• Discrete output Pass• Discrete output Fail• Pass/Fail results counter• Pass (Green) and Fail (red) LEDs on the SensorSelect this checkbox if the overall Pass/Fail status of the inspection is dependent on the current tool.9.1.2 Math Tool: Test ParametersUse the Test parameters to configure the pass/fail conditions for the tool. Select the parameter checkbox to enable it.Figure 256. Math Tool—Test ParametersIntegerThe integer value range of the Math tool operation.DecimalThe decimal value range of the Math tool operation.BooleanThe Boolean result for the Math tool operation.9.1.3 Math Tool: ResultsTools & Results and All Results list information from the current and previous inspections.A red box around a tool indicates that the tool failed. Status provides information about the specific failure.All Results displays the Result, Time, Pass Count, and Fail Count information at a glance. Expand the inspection tool to see specificresults for that tool.Integer ResultThe integer value result of the Math tool operation.VE Series Smart Camera128 www.bannerengineering.com - Tel: 763.544.3164
