Where applicable, use the sliders or enter the minimum and maximum for the selected test parameters.Figure 81. Test ParametersCount - GoodThe number of good beads.Count - Narrow/GapThe number of narrow beads.Count - WideThe number of wide beads.Largest WidthThe maximum width found.Smallest WidthThe minimum width found.Average WidthThe average width found.Total Length - GoodThe total length of good beads.Total Length - Narrow/GapThe total length of narrow beads.Total Length - WideThe total length of wide beads.Longest Length - GoodThe longest good bead length.Longest Length - Narrow/GapThe longest narrow bead length.Longest Length - WideThe longest length of wide beads.8.2.3 Bead Tool: ResultsTools & Results and All Results list information from the current and previous inspections.A red box around a tool indicates that the tool failed. Status provides information about the specific failure.All Results displays the Result, Time, Pass Count, and Fail Count information at a glance. Expand the inspection tool to see specificresults for that tool.Count - GoodThe number of beads that fall within the user-defined good bead width.Expand Count - Good to see the length of each bead, the total length of all beads, and the longest length.Count - Narrow/GapThe number of narrow beads or gaps that qualify as having a narrow bead width.Expand Count - Narrow/Gap to see the length of each bead, the total length of all beads, and the longest length.Count - WideThe number of wide beads that qualify as having a wide bead width.Expand Count - Wide to see the length of each bead, the total length of all beads, and the longest length.Average WidthThe average width of all beads.Expand Average Width to see the largest width and the smallest width.Adaptive ThresholdThe grayscale value used to detect the bead when the Threshold Type is Adaptive. If the tool cannot calculate this value, or ifthe Threshold Type is Fixed, this value displays as --.VE Series Smart Camera60 www.bannerengineering.com - Tel: 763.544.3164
