NoWrite 0 to Input BitsRegisterStartWrite desired program number (as a32-bit integer) into the ProductChange Number locationMake sure Camera is Ready – bit 0is set to 1 in Output Bits RegisterExecute Product Change: set bit 0 ofthe Input Bits Register to 1Product change successfulIs Product Change ACK(bit 0 in Input Bits ACKRegister) set to 1?YesNoRead error code. Correctthe error conditionYesDoneIs Execution Error (OutputBits Register bit 15) set to 1?Figure 331. Product Change—Modbus/TCP, EtherNet/IP, PCCCVerify :Ready = 1ProductChangeACK = 0ReadyProductChangeProductChangeACK = ‘1’New inspectionis loadedRPI 0 1 X X+Y X+Y+ZProductChangeACKSetProductChange= 1Verify :Ready = 1ProductChangeACK = 0SetProductChange= 0Product ChangeX, Y, Z: Represent snapshots in timeFigure 332. Product Change Timing Diagram13.5.1 ConfigurationThe following images represent a typical configuration.VE Series Smart Camerawww.bannerengineering.com - Tel: 763.544.3164 185
