6 Vision Manager WorkspaceVision Manager has five main working areas, or screens:• Home Screen on page 22—The Home screen provides access to connect to a sensor or emulator, update firmware, andview sensor and Vision Manager software information.• Sensor Screen on page 26— The Sensor screen displays the information needed to create or modify an inspection.• Inspection Logs Screen on page 30— The Inspection Logs screen displays saved images and inspection information.Inspections logs can be viewed when the camera is offline.• Inspection Management Screen on page 31—The Inspection Management screen includes options to add inspections tothe currently connected sensor, to rename an inspection, and to transfer inspections between a connected sensor and anetwork location or storage device.• System Settings Screen on page 34—The System Settings screen provides access to view and adjust sensor information,discrete I/O, communications settings, system logs, and units.6.1 Home ScreenThe Home screen provides access to connect to a sensor or emulator, update firmware, and view sensor and Vision Managersoftware information.The following are available from the Home screen:• Sensor Neighborhood• Sensor Maintenance• Emulators• AboutFigure 16. Home ScreenOnly one sensor can be connected to each instance of the software. Open more than one instance of Vision Manager if you want toconnect to more than one sensor at a time. Only one instance of the software can be connected to the Emulator at a time.6.1.1 Sensor NeighborhoodUse Sensor Neighborhood on the Home screen to connect to active sensors. Sensor Neighborhood opens by default when thesoftware is launched.Active Sensors TabUse the Active Sensors tab in Sensor Neighborhood to connect to an active sensor.Navigate: Home > Sensor Neighborhood > Active Sensors.This tab includes sensor information such as sensor status, sensor name, IP address, MAC address, and model number. Sensors can alsobe added to Favorites.VE Series Smart Camera22 www.bannerengineering.com - Tel: 763.544.3164
