Barco R9002380 Owner's Manual

Contents

Barco R9002380 Owner's Manual Manual pdf 16 page image

Connections2-4 5976066 BARCOCINE 7 011299Connecting a RGB Analog source with composite sync.RGB analog input terminals with composite sync input or with sync on green. The projector detects automatically where the sync signalis located.Note :If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video inputsignal will be displayed as a non interlaced image (= improved image stability).To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter'Random access' adjustment mode).Always use an interface when a computer and local monitor have to be connected to the projector.BARCO's Interface units.Universal analog interface R9826100RGB 120 MHz Analog Interface R9826570 (230V)Multifunctional Analog Interface Kit R9828120 (230V)(MAGIK) R9828129 (120V)VGA interface R9828070 (230V)R9828079 (120V)MAC interface R9828050 (230V)R9828059 (120V)Input Priority settingDepending on the priority setting in the 'Picture Tuning menu', Video or S-Video can be displayed.If the setting is not correct, handle as follow :1 Press ADJUST key to start up the adjustment mode. The main menu will be displayed (menu 1).2 Select 'Service Menus'.3 Press ENTER to select.A warning menu, 'risk of incorrect adjustment', will be displayed (menu 2).4 Press ENTER to continue if you are qualified, or EXIT if not.When ENTER is pressed, the 'Adjustment main menu' will be displayed (menu 3).5 Select 'Random Access'.6 Press ENTER to select.The 'Choose a setup pattern menu' will be displayed (menu 4).7 Select 'Selected source'.8 Press ENTER to display the 'Random Access' menu (menu 5).9 Select 'Picture Tuning'.10 Press ENTER to display the picture tuning menu (menu 6).11 Select 'Port2 : Video'.12 Press ENTER to toggle between VIDEO or S-VIDEO.13 Press ADJUST to return to operational mode.menu 3menu 1 menu 4menu 5menu 2menu 6Select with or then to return.Choose a setup patternfrom below :SELECTED SOURCEGENLOCKED PATTERNINTERNAL # PATTERNSource 01WARNINGRisk of incorrectadjustment of the projectorThe followingSERVICE menusare reserved to,and to be performed onlyby qualified personnel !If qualified, press to continue, orif not, to return.Select with or then to return.ADJUSTMENT MODESelect a path from below :GUIDEDRANDOM ACCESSINSTALLATIONSERVICESource 01Select with or then to return.MAIN MENUImage ControlIRIS ControlSound ControlFunction keysService MenusSelect with or then to return.RANDOM ACCESSADJUSTMENT MODEPICTURE TUNINGGEOMETRYCONVERGENCECOLOR SELECTSelect with or to accept to return.PICTURE TUNINGCOLOR BALANCESYNC : FASTDECODING : EBUPORT2 : VIDEOLINE DOUBLER : ON