Service Mode8-115976066 BARCOCINE 7 011299Select with or then to return.MEMORY MANAGEMENTCOPY A BLOCKDELETE A BLOCKDELETE ALL BLOCKSALL SETTINGS TO MIDPOSR & B CONVERGENCE MIDGR CONVERGENCE MIDGreen convergence midWhat can be done ?The green convergence settings can be set to midposition.Only available when the projector is equipped with green convergence adjustments.How to set Green settings to midposition ?1. Push the cursor key or to highlight 'GR Convergence Mid' (menu 1).2. Press ENTER to select.A confirmation screen will be displayed first (menu 2).3. Press ENTER to confirm.Press EXIT to cancel the procedure to set the green convergence settings to their midposition.GR CONVERGENCE MIDConvergence settingsin current blockwill be overwritten ! to confirm to cancelmenu 2menu 1Undo green convergence midWhat can be done ?'Undo Gr convergence mid' is displayed in the Memory management menu in stead off 'Gr convergence mid' when this latter is pressed.Only available when the projector is equipped with green convergence adjustmentes.When "Gr convergence mid" is selected, all green convergence settings are set to their midposition.How to undo ?1. Push the cursor key or to highlight 'Undo Gr convergence mid' (menu 1).2. Press ENTER undo.Select with or then to return.MEMORY MANAGEMENTCOPY A BLOCKDELETE A BLOCKDELETE ALL BLOCKSALL SETTINGS TO MIDPOSR & B CONVERGENCE MIDUNDO GR CONVERGENCE MIDmenu 1Common SettingsWhat can be done ?Within the common settings menu, the following items can be set up or executed :- G2 adjustment- CRT run in cycle- Projector warm up- Memory banks : on/off
