7-175976066 BARCOCINE 7 07022000Random Access Adjustment ModeSelect with orthen to return.H SIZE70GEOMETRYH PHASERASTER SHIFTLEFT-RIGHT (E-W)TOP-BOTTOM (N-S)siV LINEARITYBLANKINGImage tooTall Image tooShortIdealImageHightIdealImageHightSelect with or then to return.TOP-BOTTOM (N-S)H CENTERLINE BOWH CENTERLINE SKEWTOP KEYSTONETOP BOWBOTTOM KEYSTONEBOTTOM BOWieq
vv2 gyigsyxH size toolargeH size toosmallIdeal image widthStart upTo correct the Seagull Correction :1. Push the cursor key or to highlightSEAGULL CORRECTION (menu 1)2. Press ENTER to activate.Eliminate the deformation by pushing the cursor key or until a straight line is obtained (image 1).menu 1 image 1Size AdjustmentWhat can be done ?To adjust (correct) a little bit the picture size (when the projector is on its correct position) in regard with the installed screenStart up1. Push the cursor key or to highlight Size (menu 1).2. Press ENTER to activate (menu 2).1. Push the cursor cursor key or until the exact image width is obtained (horizontal size) (image 1).2. Push the cursor key or until the exact image height is obtained (vertical size) (image 2).Note :- If the internal # pattern was selected, this pattern remains on the screen.- If the genlocked pattern was selected, the external source will be displayed.A bar scale and a numeric indicator help to gauge the size adjustment.HintIn order to avoid loss of resolution in the projected image and to ensure maximum CRT longevity, do not use an excessively smallhorizontal size setting.menu 1menu 2image 1image 2
