Service Mode8-75976066 BARCOCINE 7 011299Select with or then to return.SERVICE MODEPROJECTOR SET-UPMEMORY MANAGEMENTCOMMON SETTINGSI2C DIAGNOSTICSSelect with or then to return.MEMORY MANAGEMENTCOPY A BLOCKDELETE A BLOCKDELETE ALL BLOCKSALL SETTINGS TO MIDPOSR & B CONVERGENCE MIDGR CONVERGENCE MIDmenu 1 menu 2How to select ?To select Memory Management :1. Push the cursor key or to highlight Memory Management (menu 1).2. Press ENTER to select.The memory management menu will be displayed (menu 2).Copy a blockWhat can be done ?The copy a block function copies the settings of a selected block into the active block.Mode [ON/OFF] :Select Mode and toggle with ENTER between ON and OFF.ON : BARCO logo will be displayed on the screen when leaving the adjustment mode.To position the logo on the screen, push the cursor key up, down, to the left or to the right until the desiredposition is reached.OFF : No BARCO logo displayed on the screen when leaving the adjustment mode.Size [SMALL/LARGE] :Select Size and toggle with ENTER between Small and Large.SMALL : Small BARCO logo will be displayed if mode is on.LARGE : Large (double size) BARCO logo will be displayed if mode is on.Background [ON/OFF] :Select Background and toggle with ENTER between ON and OFF.ON : BARCO logo will be displayed on a black background. BARCOOFF : BARCO logo will be displayed without any background. BARCOOrbiting [ON/OFF] :Select Orbiting and toggle with ENTER between ON and OFFON : the BARCO logo will orbit around its axis.OFF : no orbit of the BARCO logo.Memory managementWhat can be done ?Within the memory management menu, the following items can be consultated or executed :- copy a block- delete a block- delete all blocks- all settings to midposition- R & B convergence to mid- Gr convergence mid (only if green convergence is available)
