Service Mode8-6 5976066 BARCOCINE 7 011299How to change the mode ?To change the Power up mode:1. Push the cursor key or to highlight Power Up (menu 1).2. Press ENTER to toggle between 'Operating' and 'Standby'.Select with or then to return.PROJECTOR SET-UPIDENTIFICATIONTOTAL RUN TIMECHANGE PASSWORDCHANGE LANGUAGECHANGE PROJECTOR ADDRESSCHANGE BAUDRATEPOWER UP MODE : operatingBARCO LOGOSelect with or to toggle to return.BARCO LOGOMODE : ONSIZE : SMALLBACKGROUND : ONORBITTING : ONYou can move the logoon the screen, usingthe arrow keys.WARNING : continuoususe of the BARCO logodamages the RED CRT !Select with or then to return.PROJECTOR SET-UPIDENTIFICATIONTOTAL RUN TIMECHANGE PASSWORDCHANGE LANGUAGECHANGE PROJECTOR ADDRESSCHANGE BAUDRATEPOWER UP MODE : operatingCOMMON ADDRESS : 0BARCO LOGOmenu 1Common AddressWhat can be done ?Every projector listens to a common address. This common address can be set to '0' or '1'. When a RCU is programmed with thatcommon address, every projector with that same common address will follow up the commands given by that RCU.Why 2 different common address ?The reason to have the choice to select between common addresses is, to avoid controlling of other IR controlled units, e.g. a TVset with standard common address 0.How to change the common address ?1. Push the cursor key or to highlight Common Address (menu 1).2. Press ENTER to toggle between '0' and '1'.menu 1 menu 2Select with or then to return.PROJECTOR SET-UPIDENTIFICATIONTOTAL RUN TIMECHANGE PASSWORDCHANGE LANGUAGECHANGE PROJECTOR ADDRESSCHANGE BAUDRATEPOWER UP MODE : operatingCOMMON ADDRESS :0BARCO LOGOmenu 1BARCO logoWhat can be done ?The BARCO logo can be added to the image, in overlay or in background, on any place on the screen.WARNINGContinuous use of the BARCO logo damages the RED CRT.How to add the BARCO logo ?To add the BARCO logo or to change a setting in the BARCO logo menu :1. Push the cursor key or to highlight BARCO_logo (menu 1).2. Press ENTER to select.The BARCO logo menu will be displayed on the screen (menu 2). Within this menu, four toggle settings are available.
