7-20 5976066 BARCOCINE 7 07022000Random Access Adjustment ModeSelect with orthen to return.CONVERGENCESelect with orthen to return.GREEN ONLYRED ON GREENBLUE ON GREEN985 4 1 2 36 101871522RANDOM ACCESSADJUSTMENT MODEPICTURE TUNINGGEOMETRYgyxiqixgiCOLOR SELECTCONVERGENCESEL : select areausingarrow keysADJ : adjust areausingarrow keysToggle betweenSEL and ADJwith continue to returnCONVERGEADJUSTMENT70red imagegreen image14 1617122011 131921242325Convergence AdjustmentWhat has to be done ?Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed onthe red image while superimposed on the green image and then on the blue image while superimposed on the green image. Thescreen is devided into 25 areas (image 1)NoteThe green convergence adjustments can be added as an option. When these are available, start always with 'green only'. This optionwill also be indicated on the convergence menu.Adjustment orderAdjust first the 'green only' when available and continue with red on green and blue on green.Start up1. Push the cursor key or to select desired adjustment.2. Press ENTER to activate.How to adjust ?1. Use the cursor keys to move the box to the desired zone.2. Press ENTER to begin the convergence adjustment.Start the convergence adjustment with zone one and continue as mentioned in the image 1.3. Use the cursor keys to make horizontal or vertical convergence adjustments in the selected zone (image 2).4. Press ENTER to move to another zone.5. Press EXIT to return to the convergence menu.menu 1 menu 2image 1menu 3 image 2image 3
