Connections2-6 5976066 BARCOCINE 7 011299COMM PORT(800 peripherals) REMOTE S VIDEO S-VIDEOProfessional VCR Audio amplifierR G(S) BR-Y Y(S) B -YRS232 OUTRS232 INRGB3S or RG3sB input selectiona. Press digit button 4 on the RCU orb. With the local keypad :(to gain access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)1. Press ADJUST key, the General access menu is displayed on the screen (menu 1).2. Use the cursor keys to highlight4.3. Press ENTER to display the source.menu 1GENERAL ACCESSSelect with ,orthen . to returnSHARPNESSTINTCOLORBRIGHTNESSCONTRAST5 63 41 2Enter ADJUSTConnecting a Component source.(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input. The projector detects automatically wherethe sync signal is located.Line doubling or multipling is possible for component video input sources on standard line frequency.Note :If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video inputsignal will be displayed as a non interlaced image (= improved image stability).To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter'Random access' adjustment mode).(R-Y)Y(B-Y)S or (R-Y)Ys(B-Y) input selectiona. Press digit button 5 on the RCU orb. With the local keypad :(to gain access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)1. Press ADJUST key, the General access menu is displayed on the screen (menu 1).2. Use the cursor keys to highlight5.3. Press ENTER to select the highlighted source.GENERAL ACCESSSelect with ,orthen . to returnSHARPNESSTINTCOLORBRIGHTNESSCONTRAST5 63 41 2Enter ADJUST
