7-10 5976066 BARCOCINE 7 07022000Random Access Adjustment ModeLuminanceDelay- +0Menü 11cSelect with or then to return.Select with or then to return.LINE MULTIPLIERTIME BASE CORRECTION : ONLUMINANCE DELAYV SYNC REF : sxhsigCLAMP GATING : OFFFACTORY PRESETWARNING : ADVANCEDADJUSTMENT SHOULD BEPERFORMED ONLY BY QUALIFIEDPERSONNELLINE MULTIPLIERTIME BASE CORRECTION : ONv
wsxexgi2 hiveV SYNC REF : INDIRECTCLAMP GATING : OFFFACTORY PRESETWARNING : ADVANCEDADJUSTMENT SHOULD BEPERFORMED ONLY BY QUALIFIEDPERSONNELSelect with or then to return.LINE MULTIPLIERTIME BASE CORRECTION : ONLUMINANCE DELAYV SYNC REF : INDIRECTCLAMP GATING :2 yppFACTORY PRESETWARNING : ADVANCEDADJUSTMENT SHOULD BEPERFORMED ONLY BY QUALIFIEDPERSONNELLuminace DelayWhen is it necessary ?When a color shift is recognized on the screen. e.g. if color bars are projected and a line between the color is recognized.How to adjust ?1. Push the cursor key or to select 'Luminance delay' (menu 1).2. Press ENTER to activate.3. Push the cursor key or to adjust the luminance delay until the color shift is eliminated (menu 2).4. Press ENTER to return to the 'Advanced Settings' menu.menu 1 menu 2Vertical Sync ReferenceWhy necessary ?e.g. When spooling a tape and start playing the image, it is possible that the image still rolls for ± 2 frames. This can be avoid by changingthe vertical sync reference to direct.How to change the vertical sync reference ?1. Push the cursor key or to select 'V Sync Ref' (menu 1).2. Press ENTER to toggle between 'direct' and ' indirect'.Default position : indirect.Clamp GatingWhy necessary ?When Time Base Correction is ON, Clamp gating should be set to ON (caution : Set H sync ref. to indirect).Also e.g. with bad video tapes or with video signals with negative pulses in the information part of the signal.How to change the Clamp Gating ?1. Push the cursor key or to select 'Clamp Gating' (menu 1).2. Press ENTER to toggle between ON and OFF.Default position : OFF.menu 1
