Chapter 5: Local ManagementPage 5-562H22-08R SmartSwitch 2208 User’s Guide8. Enter the complete pathway and file name of the image stored on thedownload server. For example: /tftpboot/2H22.hex9. Use the arrow keys to highlight EXECUTE at the bottom of the screenand press ENTER. The message “TFTP DOWNLOAD. WILLCOMMIT TO FLASH. REBOOT IN PROGRESS...” displays in theevent message line at the top of the screen and the new image isdownloaded into FLASH memory.5.14.3 Image File Download Using RUNTIMETo download a firmware image into FLASH using RUNTIME, proceed asfollows:1. Use the arrow keys to highlight the Download Method field.2. Use the SPACE bar to select RUNTIME.3. Use the arrow keys to highlight the Reboot After Download field.4. Use the SPACE bar to select either YES or NO. Select YES if youwant the device to reboot after the download is completed. Select NOif you want the device to store the new image in FLASH memory untilthe device is reset during the next power-up.5. Use the arrow keys to highlight the TFTP Gateway IP Addr field.6. Set the IP address of the TFTP gateway server (this defaults to thesame IP address as that set in the TFTP Gateway IP Addr field on theGeneral Configuration screen).7. Use the arrow keys to highlight the Download Server IP field.8. Enter the IP address of the TFTP server using the DDN format. Forexample: 134.141.79.1219. Use the arrow keys to highlight the Download File Name field.10. Enter the complete pathway and file name of the image stored on thedownload server.For example: /tftpboot/2H22.fls11. Use the arrow keys to highlight EXECUTE at the bottom of the screenand press ENTER. The message “RUNTIME DOWNLOAD. WILL
