Chapter 5: Local ManagementPage 5-82H22-08R SmartSwitch 2208 User’s Guide5.4 ACCESSING LOCAL MANAGEMENTAccess to Local Management is controlled through the LocalManagement Password screen shown in Figure 5-3. Whenever aconnection is made to the 2H22-08R, the Password screen displays.Before continuing, you must enter a password (community name) whichis compared to the previously stored passwords. The level of accessallowed to a user depends on the password. To set or change passwordsrefer to Section 5.8.1.The following steps describe the procedure to access Local Management:1. Turn on the terminal. Press ENTER (this may take up to four times,because the COM port of the 2H22-08R auto-senses the baud rate ofthe terminal) until the Local Management Password screen displays.Figure 5-3 Local Management Password Screen2. Enter the password and press ENTER. The default super-user accesspassword is “public” or press ENTER.2H22-08R LOCAL MANAGEMENTCABLETRON Systems, IncorporatedP.O.Box 5005Rochester, NH 03866-5005 USA(603) 332-9400(c) Copyright CABLETRON Systems, Inc, 1997Device Serial Number: XXXXXXXXXDevice Hardware Revision: XXDevice Firmware Revision: X.XX.XXDevice BOOTPROM Revision: X.XX.XXEnter Password:22511-12
