Chapter 5: Local ManagementPage 5-502H22-08R SmartSwitch 2208 User’s Guide5.13 SYSTEM RESOURCES SCREENThe System Resources screen, Figure 5-20, provides informationconcerning the processor used in the 2H22-08R and the amount ofFLASH memory, DRAM, and NVRAM that is installed and how much ofthat memory is available. This screen also allows you to monitor thecurrent processor (switch) utilization and the peak switch utilization.To access the System Resources screen from the Device SpecificConfiguration Menu screen, use the arrow keys to highlight the SYSTEMRESOURCES menu item and press ENTER. The System Resourcesscreen displays.Figure 5-20 System Resources ScreenThe following briefly explains each field on the System Resources screen.CPU Type (Read-only)Indicates the microprocessor used in the 2H22-08R.Firmware Revision: XX.XX.XXSystem Resources2159-40BOOTPROM Revision: XX.XX.XXFlash Memory Installed :X MBDRAM Installed:XX MBNVRAM Installed:XX KBAvailable: XXXXX BytesAvailable: XXXXX BytesAvailable: XXXXX BytesCPU Type: i960 HT 25MhzCurrent Switch Utilization: 66%Peak Switch Utilization: 75%Reset Peak Switch Utilization: [NO]Device Type: 2H22-08REXIT2H22-08R LOCAL MANAGEMENTEvent Message LineSAVERETURNRETURN
