Chapter 5: Local ManagementPage 5-322H22-08R SmartSwitch 2208 User’s Guide5.8 SNMP COMMUNITY NAMES SCREENThe SNMP Community Names screen allows you to set SNMPmanagement community names. Community names act as passwords toLocal/Remote Management and are agents of security access to the2H22-08R.Access to the 2H22-08R is controlled by enacting any of three differentlevels of security authorization (read-only, read-write, and super-user).To access the SNMP Community Names screen from the DeviceConfiguration Menu screen, use the arrow keys to highlight the SNMPCOMMUNITY NAMES menu item and press ENTER. The SNMPCommunity Names screen, shown in Figure 5-15, displays.Figure 5-15 SNMP Community Names ScreenNOTESuper-user access gives you full management privileges,allows existing passwords to be changed, and all modifiableMIB objects for the Cabletron Container MIB and InternetMIB-II to be edited.Firmware Revision: XX.XX.XXSNMP Community Names2159-17BOOTPROM Revision: XX.XX.XXAccess Policyread-onlyread-writesuper-userDevice Type: 2H22-08R2H22-08R LOCAL MANAGEMENTEvent Message LineRETURNSAVECommunity NamepublicpublicpublicEXIT
