Chapter 5: Local ManagementPage 5-422H22-08R SmartSwitch 2208 User’s Guide5.11 ETHERNET INTERFACE CONFIGURATIONTo access the Ethernet Interface Configuration Menu screen shown inFigure 5-18 from the Device Configuration Menu screen, use the arrowkeys to highlight the ETHERNET INTERFACE CONFIGURATIONmenu item, and press ENTER. The Ethernet Interface Configurationscreen displays.Figure 5-18 Ethernet Interface Configuration ScreenThe following section briefly explains each field of the Ethernet InterfaceConfiguration screen:Port Type (Read-Only)Displays the type of physical media supported by ports 1 through 8.Ethernet Interface Configuration2159-23Firmware Revision: XX.XX.XXBOOTPROM Revision: XX.XX.XXDevice Type: 2H22-08R2H22-08R LOCAL MANAGEMENTEvent Message LineRETURNSAVEPortNum12345678FE-100TXFE-100TXFE-100TXFE-100TXFE-100TXFE-100TXFE-100FXFE-100FXPortTypeLinkStatusLinkLinkNo LinkLinkLinkNo LinkLinkLinkCurrentOper. Mode10Base-TFD100Base-TXFD100Base-TXFD100Base-TX10Base-T100Base-FXFD100Base-FXDesiredOper. Mode[Auto-Neg][100Base-TXFD][100Base-TXFD][100Base-TXFD][100Base-TXFD][100Base-TX][100Base-FXFD][100Base-FX]Advertised Ability100Base-TXFD [100Base-TXFD][100Base-TXFD][100Base-TXFD][100Base-TXFD][100Base-TXFD][100Base-TX]N/AN/A[Disabled][Enabled][Enabled][Disabled][Enabled][Enabled]EXITFlow Control Admin Status: [ Enabled ]
