Cabletron Systems 5000, 5500 Manual

Contents

Device Configuration ViewConfiguration Views Cisco Catalyst 5000/5500 Hub3-2 Management Module GuideNumber of InterfacesDisplays the number of ports for the device.Router RedundancyThis button allows you to enable (true), or disable (false) redundancy for thisinterface. By default it is set to be true.This button accesses the IF Address Translation Table. This table cross-references device IP addresses to device MAC (Ethernet) addresses forselected nodes between networks. Double-click a column entry to open anaddress-specific Address Translation Table Information view, which allowsyou to alter the index or addresses.This button allows you to update the Device Configuration view to reflect anychanges that have been made to the devices in the chassis.Interface Configuration TableThis table within the Device Configuration view provides the followingconfiguration information for the device and each port:IndexDisplays the interface or port number.DescriptionProvides a description of the interface or port.TypeDisplays the type of hardware interface or port. Some of the possible types areEthernet, FDDI, T1, PPP, and Reg1822.BandwidthDisplays the estimated bandwidth of the interface measured in bits persecond. For interfaces that do not vary in bandwidth, or for which no accurateestimate can be made, a nominal bandwidth is providedPhysical AddressDisplays the physical (MAC) address of the interface or port.Operation StatusDisplays the current operational state of this interface or port (Up, Down, orTesting).Admin. StatusDisplays the administrative status for this interface. Possible states are: On,Off, and Testing.IF Address TranslationReconfigure