Cabletron Systems 5000, 5500 Manual

Contents

9032208 E4 Application View5-15Device Application ViewCatalyst Trap Receiver TableCatalyst Trap Receiver TableThis table lists the addresses of Network Management Stations that shouldreceive trap messages from the Catalyst Stack Application. Double-click atable entry to access the entry-specific Catalyst Trap Receiver table, whichallows you to change the items displayed in the table.To access the Catalyst Trap Receiver table, do the following:1. Within the Application view, highlight the CATStackApp icon (icon mode)or model type name (list mode).2. From the Icon Subviews menu, select Trap Receiver.The Catalyst Trap Receiver table provides the following information:The Trap Receiver Table and its corresponding entry-specific views providethe following information:TypeDisplays the status of this entry. Setting this value to “Invalid” removes thecorresponding entry from the Trap Receiver Table. To add a new entry to theTrap Receiver Table, set this value to “Valid” for an IP address that is notalready in the table.AddrDisplays the IP address of the Network Management Station receiving thetraps.CommunityDisplays the community string used for trap messages sent to this trapreceiver.Catalyst VLan TableThe Catalyst VLan table provides a list of Virtual LAN entries, which aredetermined by the LANs within the system. To access the Catalyst VLantable, do the following:1. Within the Application view, highlight the CATStackApp icon (icon mode)or model type name (list mode).2. From the Icon Subviews menu, select VLan.The VLan table view provides the following information:VLan IndexIdentifies the Virtual LAN associated with this module port.Spanning TreeIndicates whether the Spanning Tree protocol is enabled for this Virtual LAN.Possible values are Enabled and Disabled.